Archive for the ‘Hardwood Floor’ Category

How To Lay A Replacement Hardwood Floor Board

If you’re seriously interested in knowing about Hardwood Floor, you need to think beyond the basics. This informative article takes a closer look at things you need to know about Hardwood Floor.

If a particular plank on your hardwood floor is beyond repair, your best option would be to replace the board with a new one. YOu might initially think that floor board replacement is a job that is reserved only for the professionals. In fact, laying a floor board is actually something you can do yourself, given the right tools and the proper instructions.

There are hardware stores that sell bundled packages for do it yourself hardwood floor replacement projects. They even come with step by step instructions to help even the most inexperienced of floor layers easily understand and follow. So, when your plank needs relaying, have no fear. Instructions on how to lay replacement boards are here.

1) Clear the damaged area of all the nails embedded into it. You can do by positioning a nail set over the nail and driving it down as far as possible using a hammer. The purpose of this is to avoiding having the hammer pound against the wood and causing further damage.

2) Once the nails are removed, remove the damaged board by using a wood chisel to pry the affected area out. The absence of the nails should make this process easy, but you still have to be careful not to ruin the adjacent boards.

You may not consider everything you just read to be crucial information about Hardwood Floor. But don’t be surprised if you find yourself recalling and using this very information in the next few days.

3) Prepare your replacement plank and try to see if its a perfect fit to the blank spot. If it’s too big you will have to make the necessary adjustments.

4) Turn the replacement board over and put construction adhesive. This will enable the plank to stick to the subfloor.

5) Tap the board into place and make sure that it’s in the right position. When you have finally decided on its placement, that’s when you drive 2-inch nails to secure it. Use a nail set to drive the nails’ heads a little below the surface so they don’t jot out.

6) Sand the area to even the surface out and apply a finish that matches the rest of the hardwood floor.

Now you know how to lay a replacement hardwood floor board without paying for professional help.

If you’ve picked some pointers about Hardwood Floor that you can put into action, then by all means, do so. You won’t really be able to gain any benefits from your new knowledge if you don’t use it.

About the Author
By Anders Eriksson, now offering the best guide on movie downloads over at free movie downloads

How To Repair Damages On Your Hardwood Floor

Have you ever wondered what exactly is up with Hardwood Floor? This informative report can give you an insight into everything you’ve ever wanted to know about Hardwood Floor.

Your hardwood floor, no matter how sturdy, is not spared from wear and tear. Over time, it will be at the mercy of water or ink spills, heel scratches, hardened gum, accumulated dust and grime, and other floor nuisances. But before you pick up the phone to call for professional assistance, know that there are certain minor damages that you can remedy yourself.

Here are some tips on how to repair damaged hardwood flooring.

1) Damage caused by stains

Water is the worst enemy of hardwood floors. A single stain can ruin the look of the entire surface and, often, the only way to effect the necessarily repairs to get rid of this eyesore is to refinish the whole floor.

However, you can still try to salvage the situation by focusing on the affected spot first. If it’s not something you can remedy through sanding, then that’s the time you search for replacement planks. But, hey, if you think the stain is what gives your floor character, then you really have nothing to fuss about.

2) Damage caused by scratches

You can see that there’s practical value in learning more about Hardwood Floor. Can you think of ways to apply what’s been covered so far?

Some people use putty sticks to fill in the scratches. Simply rub the stick over the affected spot and then wipe it clean with a soft dry cloth. More likely than not, any semblance of a scratch will disappear. This is a quick fix to a big problem and will save you from having to bring in the experts for such a minor job.

3) Damage beyond the power of minor repairs

Of course, there will be times where the damage becomes too much for simple repair techniques to handle. In this case, you will need to replace the hardwood board that has been destroyed. Again, there is no need to phone the specialists for this job because it is something you can manage yourself.

What you should do is take out the damaged board, get a new plank that’s of the same size and lay it on. Now this seems very easy but it actually involves several processes to complete. But while there are several procedures, you will find that each step is easy to follow, even for someone who is a beginner at floor board replacements.

Your hardwood floor gives you more value than you think. Aside from its physical beauty, the fact that it withstands the test of time is enough reason for you to award it with the regular maintenance checks and care it deserves. And if the job can be done using only both your hands and your patience, then spending for professional help is impractical.

About the Author
By Kenneth Allan Crosby jr,feel free to visit his top ranked recycling site: recycling, tips, history

Using Hardwood Flooring For Your Apartment

Would you like to find out what those-in-the-know have to say about Hardwood Floor? The information in the article below comes straight from well-informed experts with special knowledge about Hardwood Floor.

You’re about to get your own apartment. You’re starting to imagine a life of independence, of mini parties til the late night, and of, well, basically, parent-less living. But getting your own apartment doesn’t instantly mean that you’re off the hook.

If you’ve moved into an unfurnished unit, you are most likely compelled to make the necessary structural repairs. What kind of furniture would you want to put in? Should you set up a home office? Should you install a chandelier? Do you want to cover up that drab looking concrete floor with hardwood flooring? Should you retile the bathroom? There are so many questions you need to answer.

If you’ve decide to use hardwood flooring for your new apartment, then you have to prepare yourself for a considerable expense. Before you back off at the concept of spending a significant amount for just your floor, realize that nothing beats the natural feel of having a hardwood floor. Also, if you’re considering staying in your apartment for quite a while, then you would greatly benefit from having a hardwood floor.

There are special hardwood floors in the market that are deliberately distressed to give off that unique look. A distressed hardwood flooring for your apartment could be a great conversational piece.

You may not consider everything you just read to be crucial information about Hardwood Floor. But don’t be surprised if you find yourself recalling and using this very information in the next few days.

Of course, if you’re after convenience, it would do you well to buy prefinished hardwood floors to spare you from the hassle of having to sand it, wax it, apply finishings and stains. Installing unfinished hardwood floors can also be more expensive when the final bill comes.

Surely you want your apartment to look fab when your friends and parents come over to visit, and hardwood floors will definitely afford you all positive praises. Just be sure to properly care for and maintain it so it doesn’t become a waste of your investment. Hardwood comes from trees, and trees are organic. If you don’t take care of your flooring, then all your expenses will be for naught.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO Hosting

How To Clean Your Hardwood Floor

The more you understand about any subject, the more interesting it becomes. As you read this article you’ll find that the subject of Hardwood Floor is certainly no exception.

It is easy to build a house using concrete and steel, but it is quite a challenge to do so using wood. You might wonder why this is so, when wood is, perhaps, one of the most common building materials there is around.

This is because, unlike concrete, wood is an exhaustible resource. Meaning, if nobody plants trees, then it’s not likely that we will get any hardwood. And since most of our forest are starting to get depleted, then it is likely that the availability and cost of hardwood would continue to rise over time. Thus, our hardwood floors deserve the best treatment, if we are to expect longevity and stability from them.

So how do we clean our hardwood floors to ensure that they last long enough for the next generations to enjoy and benefit from? Here are some tips you might want to consider.

First, when cleaning your hardwood floor, make sure that you use a broom that explodes at the ends. A broom with too fine bristles won’t trap the dirt and will only have it accumulate within the little cracks and creases.
Over time, this will damage your flooring and eventually cause wear. You won’t be able to notice the changes until the damage becomes apparent. Surely this is something you want to avoid.

Is everything making sense so far? If not, I’m sure that with just a little more reading, all the facts will fall into place.

Second, do not use oil based soaps to clean your flooring. There are cleaning liquids made especially for hardwood floors that won’t cause damage to their finish. Remember that a finish is what shields your hardwood floor from wear and spills, so must always check if the coat is still thick enough to serve its purpose.

Third, do not leave standing water or wet rags on your hardwood floor. If this is too late, you can choose to either sand the affected area or replace the plank where the damage has been done. But if the water has just been these for a short while and your finish is newly done, then you have nothing worry about. Just wipe the wet area with a soft dry rag and you’re good to go.

Cleaning your hardwood floor requires diligence on your part, because, well, hardwood floors deserve to be maintained properly. They bring stability and sturdiness to your living space. The least you can do is to make sure it is cared for properly.

When word gets around about your command of Hardwood Floor facts, others who need to know about Hardwood Floor will start to actively seek you out.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO Hosting

All About Bamboo Floors

Bamboo is a type of grass. Being so, you might think that it is as soft and brittle as the typical grass species we know and can no way be used as building material. However, bamboo has proven itself very resilient and flexible, making it the material of choice for many structure builders.

The cost of bamboo flooring averages at between $2 and $4 for every square foot, which is just about the same price as oak. This is a fair price considering the many benefits it offers.

Installing bamboo flooring does not require any special and specific technique. In fact, there are several ways you can lay them on: You can float them, nail them down, or glue them on. Bamboo is also easier to get than oak because it only takes around 3 years for it to mature, as opposed to oak which can take up to a hundred years to be fully mature.

How can you put a limit on learning more? The next section may contain that one little bit of wisdom that changes everything.

It is important to note that that bamboo is not a wood — it’s a grass, so we cannot call it hardwood. However, it can last as long as the standard hardwoods we have around, so that’s probably why most people mistake it as such.

To make a flat, solid floor, the bamboo tubes are cut into strips. These are then these are boiled to strip the starch away. The boiled strips proceed to the drying and lamination process, and then milled to become strip floor boards. This is the same process that hardwoods like maple or oak go through. Finally, the strips are treated using a preservative to slow down decay.

There is something about bamboo floors that gives a room an ethnic and earthy feel. Because hardwoods like oak are rather dark and, thus, look too rich and heavy, using bamboo as your flooring makes your space appear lighter, airier, and less contrived.

But perhaps the best thing about bamboo floors is that they are easy to acquire and install. Bamboo floor strips are sold at all building materials stores. You don’t have to search far and wide to get your hands on them.

About the Author
By Kenneth Allan Crosby jr,feel free to visit his top ranked recycling site: recycling, tips, history

Does Your Hardwood Floor Finish Need Reapplying?

The following paragraphs summarize the work of Hardwood Floor experts who are completely familiar with all the aspects of Hardwood Floor. Heed their advice to avoid any Hardwood Floor surprises.

It’s only been a few years and you see that your hardwood floor looks seemingly old. What happened? How can you make it look like new again? Before you take any step further, you should first see the condition your hardwood flooring is in. Check if any special cleaning is necessary or if serious repairs need to be done.

When evaluating the condition of your hardwood floor, observe the finish. Is it just soiled or has it already thinned out? Study your floor to see if the finishing has been scraped, dulled, or chipped.

You can find out if your finish is worn by spilling a small amount of water at a high-traffic area. If the water beads at the top, then you have nothing to worry about — the finish is still intact and sealed. But if the water seeps in and darkens the spot where it landed then you might need to redo the finishing for that particular area. If the test bears the same result for other parts of the house, then those probably need replacing, too.

Next, see if the wood is still in good condition. If the finish has shown signs of wear, it is likely that the wood has been damaged, too. If you find that the wood has started to decay, then you definitely need to replace the boards.

If it’s a situation that still can be salvaged, it would be best to just call in professionals, as a do-it-yourself endeavor, especially if you’re not that experienced, to avoid causing further damage.

The best time to learn about Hardwood Floor is before you’re in the thick of things. Wise readers will keep reading to earn some valuable Hardwood Floor experience while it’s still free.

You can try to temporarily resolve the damage by putting wax on the affected area. Take note of the word ‘temporary’ because wax is by no means a solution to woodwork problems. It simply acts as a coverup or maintenance coat until you can come up with the funds to put in replacements.

It does not take rocket science to know if your floor’s finish needs to be redone. But, while this is easy to determine, the fact that refinishing jobs are costly might put you off. But if you want to restore your hardwood floor’s beauty, then you should set a budget for repairs aside. Otherwise, your initial investment on your flooring will go to waste.

About the Author
By Kenneth Allan Crosby jr,feel free to visit his top ranked recycling site: recycling, tips, history

Sanding Your Hardwood Floor

For do-it-yourselfers, probably the most annoying part of hardwood flooring installations is the part where the floor is to be sanded. See, because there is never any precision or accuracy when you’re dealing with an organic material like wood, having uneven plank heights and gaps is inevitable. And when this happens, your only option is to sand that area down to even levels.

There are different kinds of sanding machines. There’s the drum sander and there’s the orbital sander. The orbital sander is said to be easier to use and more reliable, but the drum sander is more commonly available. If buying your own sander is not an option, you can rent it from floor installation specialists, who will also be willing to teach you how to operate it.

The best sandpaper for new floors is 20 grit, but you can change to higher grits once you’ve got the initial sanding job done. Sanding experts say the best way to sand your hardwood floor is by using just one direction and going from right to left. This is because sanders are unevenly constructed, with the left acting as the ‘digger’ and the right part as the ‘sweeper’. Surely you wouldn’t want to sweep first before cutting through the excess wood.

The information about Hardwood Floor presented here will do one of two things: either it will reinforce what you know about Hardwood Floor or it will teach you something new. Both are good outcomes.

Expect to have quite a workout while you sand your floor because the machine is not a cinch to handle. It can be very heavy and will require force on your part to control its direction. If you just leave it to its element, it could run around toward unpredictable directions and cause damage instead of result in smoothness for your floor.

It is for this reason that sanding is not something that you should experiment with. If you value your hardwood floor, get information on the right sanding techniques first before you take the plunge. If this proves too tedious for you, then just hire professionals sanders to do the job. It’s better to spend on professional services than end up shelling out a greater amount because you’ve sanded your floor the wrong way.

Overall, all woodworks require sanding if you are to expect zero splinters and total smoothness. If you don’t want to go through all this work, just go with prefinished hardwood flooring. It’s a little more expensive but it’s a small price to pay for the convenience.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO Hosting

Unique Designs For Your Hardwood Floor

Imagine the next time you join a discussion about Hardwood Floor. When you start sharing the fascinating Hardwood Floor facts below, your friends will be absolutely amazed.

The fact that hardwood comes from organic material means that no two planks of wood are ever going to be exactly alike. If you go for factory manufactured and prefinished wood, you might be able to see uniformity in the designs, especially with deliberatel distressed hardwoods, but, the bottomline is, when you use hardwood material for your floor, you are sure that what you are stepping and walking on is one of a kind.

This leads us to the question: what is it about hardwood floors that never go out of style no matter how the times and interior design principles change?

Hardwood floors offer a kind of natural sturdiness and reliability that cannot be found in most home building materials. Sure, concrete is great, but nothing beats a well finished hardwood floor to get that truly natural touch.

Having a hardwood floor in your home is an investment, but it is a one-time expenditure. This means you shell out a large amount only once because all you have to do is make sure the floor is clean and its finish its intact to for the next generations to benefit from it. Diligent waxing will do; so will constant deep cleaning.

Most of this information comes straight from the Hardwood Floor pros. Careful reading to the end virtually guarantees that you’ll know what they know.

If you want to see interesting designs on your hardwood floor, a good idea would be to have it distressed. Now you should be careful with this project as a poor distressing job could result in a disaster instead of a work of art. You should hire a professional to do this.

There are pre-distressed hardwood boards available in home building stores, but they are factory manufactured so they are likely to have repeating designs. With a hand distressed hardwood floor, you are sure that every inch is unique, and your floor will not look too fabricated. Experts on flooring can spot a fake dead-on.

As your knowledge about Hardwood Floor continues to grow, you will begin to see how Hardwood Floor fits into the overall scheme of things. Knowing how something relates to the rest of the world is important too.

About the Author
By Kenneth Allan Crosby jr,feel free to visit his top ranked recycling site: recycling, tips, history

The Convenient Way To Finish Your Hardwood Floor

The following article lists some simple, informative tips that will help you have a better experience with Hardwood Floor.

Anybody who has experienced finishing their hardwood floors by themselves will tell you that it is a very tedious task. You will not just apply the finishing once, but will have to put on several numbers of coats before it looks satisfactory. Prior to that, you will have to wrestle with the sander — a machine that is quite difficult to control. So what is the best and easiest way to come up with a nicely finished hardwood floor?

Simple. Purchase one that is already prefinished. If you’re thinking of installing hardwood flooring yourself, you can enjoy the greatest ease and convenience with prefinished planks. With prefinished hardwood floors, the task of nailing the flooring to your subfloor ends after the drilling is done.

Prefinished floors also have a better finish than most independently finished floors. Because the application is uniform and the volumes of coating controlled and predetermined, you are sure that every prefinished hardwood floor plank is of the best quality.

Normally, prefinished floors are thrice sanded and coated with aluminum oxide finish eight times. They are also likely to have been tested for various normal wear situations and made more resilient. Having a hardwood floor in your home is an investment, but it is a one-time expenditure. This means you shell out a large amount only once because all you have to do is make sure the floor is clean and its finish its intact to for the next generations to benefit from it. Diligent waxing will do; so will constant cleaning.

Now that we’ve covered those aspects of Hardwood Floor, let’s turn to some of the other factors that need to be considered.

Finally, if convenience is what you’re after, without having to sacrifice the quality of your hardwood floor and its appearance, then go for a prefinished hardwood floor. But, hey, if you want to savor the feeling that you labored over your hardwood floor yourself, then buy it pure and just buy the appropriate finish. As a last tip, water-based urethane finishes are more resilient to sun exposure, compared to those that are oil-based. Happy finishing!

About the Author
By Anders Eriksson, now offering the best guide on movie downloads over at free movie downloads

How Much Do Hardwood Floors Cost?

Hardwood floors are sold everywhere, but little do we know that it takes a lot of effort and time to prepare each plank until it is fit for building use. Trees are an exhaustible resource. This means they are not simply manufactured out of factories and have to be grown for a considerable period before they can be used. Oak hardwood, for instance, can take as long as a hundred years to mature.

Is, therefore, because of this that hardwood is comparatively expensive. Standard hardwood floors cost around $4 per square foot and that’s still the unfinished version. Prefinished hardwood floors cost a little bit more, usually at around $5 per square foot.

When buying unfinished hardwood flooring, however, don’t think that you’re saving a huge deal. Unfinished hardwood still has to be finished and stained before it can truly serve its purpose, so it’s an extra expense.

You may not consider everything you just read to be crucial information about Hardwood Floor. But don’t be surprised if you find yourself recalling and using this very information in the next few days.

If your budget is limited, then you should opt for prefinished boards, instead. They are less costly in the long run and more convenient to install. You will no longer have to worry about stains, polish and finishings once you have them in place.

If you’re looking to install flooring on an entire house or a very huge space, you can save on costs if you buy hardwood wholesale. Another way to reduce your expenditure is to purchase them on discount, which may through hardware store sales or through used wood showrooms. Of course, whenever you buy on discount, make sure that you check the entire woodwork for signs of wear and decay.

Overall, while buying and installing hardwood floors is expensive, the benefits definitely outweigh the costs. Hardwood can last generations so you’ll no longer have to worry about; just make sure it’s properly and regularly maintained and protected well. While concrete also has a similar life, or longer, nothing beats the natural feel that real hardwood affords your home.

About the Author
By Kenneth Allan Crosby jr,feel free to visit his top ranked recycling site: recycling, tips, history

Categories